Dec 09,2022

　　There are many reasons for the empty capsules in the capsule filling machine, including the hardness of the processed particles being too hard, and the gap between the copper plates being too large. Then, once this phenomenon occurs, what should we do? Zhejiang Huaguang Capsule Co., Ltd. explains the reasons and solutions for this phenomenon, as follows:

　　Why is there an empty capsule in the capsule-filling machine?

　　1. What we need to consider is whether there are granules. If there are too many granules or their hardness is too hard, the mobility of the capsule will be poor and empty capsules will appear.

　　2. Consider the reason for the counting plate. If the counting plate is too thin, it will also affect the filling amount and cause empty pockets.

　　3. Consider whether the gap between the copper plate and the metering plate is too large. If it is too large, it will cause the powder to remain on the machine table, resulting in empty pockets.

　　4. What needs to be considered is the problem of the punch and whether its viscosity is too large. If it is too large, it will appear empty during the machining process.

　　What to do if the capsule filling machine has an empty capsule:

　　1. If there is an empty bag, we need to carry out maintenance in strict accordance with the production process flow and automated operation standards. The maintenance problem occurs at that stage.

　　2. If a hopper is added to the empty bag, it is necessary to set its detailed value and move the value to a specific point to broadcast the bag.

　　3. We need to fill the cover of the upper formwork into the lower formwork, and carry out the lock-shifting process, to ensure its locking characteristics firmly, so that the capsules can flow into the accurate position.