Nov 11,2022

　　The semi-automatic capsule filling machine is further improved based on the original capsule filling machine at home and abroad. It has high technical content and unique performance. Its functions have reached the domestic level. It is ideal equipment for the production of capsule medicines in the pharmaceutical industry. The performance and characteristics of the semi-automatic capsule filling machine are as follows:

　　1. The whole machine has a beautiful appearance, fine craftsmanship, simple operation, and convenient use.

　　2. The design integrates the filling seat and the metering disc, so that the metering disc and the filling rod will not be offset, avoiding the friction between the filling rod and the metering disc, improving the filling accuracy, and prolonging the service life.

　　3. The defective capsules can be automatically removed, and the medicines in the defective capsules can be recovered and reused to increase economic benefits.

　　4. The machine is easy to disassemble, assemble, and clean. It can interchange various types of molds and can be used on the same machine to meet the requirements of different production capacities.

　　The function of the semi-automatic capsule filling machine is to automatically put the medicinal materials into the empty capsules in the capsule mold in sequence, and the hopper is equipped with a step-less speed regulating motor (the meter displays the speed), which drives the propeller to force the medicinal materials into the empty capsule. The lower turntable drives the mold to rotate, and the lower turntable is also driven by the stepless speed regulating motor, so that the mold runs under the feeding nozzle for a week, controlled by photoelectric counting (counter set 30 times) when the filling (ON) is pressed to start, the hopper It is pushed to the mold by the cylinder, and the turntable motor and the hopper motor are automatically started after the hopper is in place. When the mold rotates for one week, it automatically stops, and the cylinder automatically returns to its original position.

　　If the forward and backward speed of the hopper is too fast or too slow, the two one-way throttle valves at the solenoid valve interface can be adjusted to make the speed suitable. In addition, if the motor starts to start before the hopper is in place, or it does not start after it is in place, the time relay on the computer control board can be adjusted to start it within 1 second after it is in place. The filling volume adjustment depends on the filling volume and the fluidity of the medicine. The speed of the hopper motor and the speed of the turntable motor can be adjusted. If it is difficult to fill the medicine, the set value of the counter can be adjusted to 60 or 90. 30.